The Breeze
8
Models: 3030, 3030SR, 3030EX, 3040 and 3040SR
Making Floss
Pick a cone; if it sticks in the stack of cones, twist it off the stack.
Hold an inch or two of the pointed end of the cone between two fingers and a thumb.
With a light flicking action, roll cone in the web of floss building up in the pan. Lift the
cone up with the ring of floss attached and rotate the cone to wrap the floss. DO NOT
roll floss while the cone is inside the pan. This will pack the floss too tightly.
If the floss fails to stick to the cone, pass the cone near the spinner head to pick up a
“starter” of melted sugar. Lift the cone out of the pan and wrap the floss with a "figure
eight" movement of the hand. This leaves giant pockets and makes the final product
appear larger. Make sure room humidity is not too high, or product will be "heavy".
1.
Grip cone as shown.
2.
Break into web of
3.
Wind the sugar
4.
Lift web of floss from the
floss with the cone. onto the cone.
pan and roll onto the cone.
5.
6.
7.
8.
DO NOT put hands or objects in rotating spinner head.
DO NOT fill Spinner Head with sugar while it is rotating.
Operator should ALWAYS wear eye protection.
DO NOT put hands near rotating spinner head.
Use ONLY floss cone to collect cotton candy
.
Summary of Contents for 3030
Page 2: ...The Breeze 2 Models 3030 3030SR 3030EX 3040 and 3040SR ...
Page 10: ...The Breeze 10 Models 3030 3030SR 3030EX 3040 and 3040SR MAINTENANCE INSTRUCTIONS ...
Page 22: ...The Breeze 22 Models 3030 3030SR 3030EX 3040 and 3040SR ELECTRICAL SCHEMATIC EXPORT 3030EX ...
Page 23: ...The Breeze 23 Models 3030 3030SR 3030EX 3040 and 3040SR Electrical Schematic 3040 3040SR ...