Breeze 3030, Instruction Manual

Page: 12 / 24

The Breeze
12
Models: 3030, 3030SR, 3030EX, 3040 and 3040SR
Floss Bands and Elements
Disassembly and Removal
1. Remove all sugar from the head of the machine before disassembling. If the unit is
inoperative, carefully turn the machine on its side and shake the sugar out.
2. Remove the four spinner cap retainer screws and spinner cap. In some cases, the sugar
can cause the cap and band to stick together. Applying gentle pressure with the heel of
your hand should free the parts for removal.
3. Remove the element lead wire retaining screws with a ¼" nut driver and
remove the element lead wires from the terminals in the floss head. This will allow the
band and element to be removed.
4. Remove the band and element. If there is excessive sugar buildup, soak the band and
element in hot water until the sugar dissolves. When the sugar has been removed, allow
the band and element to dry over-night.
5. Re-assemble the floss head components, using the above steps for a reference.