11
Doc. HD40-0007-02 En-Eu L-4
Initial Set Up
Unpacking the Z1 Box
You will need to perform a few minor setup steps before using your new
Z1
. The instructions
below will guide you through the setup process. Some of the steps outlined below may have
been performed by your health care provider prior to delivering the
Z1
to you. If you have any
questions or problems as you go through the setup process, please contact Breas or your health
care provider for assistance. Breas wants your user experience with the
Z1
to be trouble and
frustration free.
1. Carefully remove the contents of the box.
2. Some of the
Z1
components have their own packaging material. Remove this material
carefully. Avoid using anything sharp when opening the packaging.
3. Carefully inspect all contents against the Package Contents list on page 9 to
assure all components are present. Keep in mind that your health care provider might
have completed some of the setup steps prior to delivery, so if a component appears
to be missing, check to see if it has already been connected. Also inspect all contents
to ensure there is no obvious or visible damage or defects. If you have any concerns
or questions, contact Breas or your health care provider before use.
4. Place all the components in an area where you can easily access the
Z1
for set up and
programming.
WARNING:
Do not use this product if you have any concerns about the
condition of the contents or if there are any missing parts.
The contents of the
Z1
box includes the following:
Z1 Base Model
Z1 CPAP
Filter
CPAP Tube
AC DC Adapter
Power Cord
Tube Adapter
USB Cable
