BRAYER BR4150, Instruction Manual

Page: 6 / 48

6 EN
• Make sure that the water level in the tank is not
above the maximal mark «MAX».
ATTENTION! The surfaces of the steam station and
the iron heat up during operation. Avoid contact
of open skin areas with hot surfaces of the unit or
outgoing steam to avoid burns.
• Do not direct the outgoing steam at people or
animals, plants or furniture pieces which can be
damaged by hot steam and moisture.
• To avoid damaging the soleplate be very careful
when ironing clothes with metal zippers or buttons.
• Never steam clothes directly on a person, always use
a clothes hanger or a stand.
• Do not use the power cord as a carrying handle for
the unit.
• Switch the steam station off and unplug it after the
use or before cleaning.
• When unplugging the steam station, hold the power
plug and carefully remove it from the mains socket,
do not pull the power cord, as this can lead to its
damage and cause a short circuit.
• To avoid electric shock, do not immerse the steam
station, the power cord and the plug into water or any
other liquids.
• Before taking the unit away, let it cool down
completely and pour out the remaining water.
• Clean the unit regularly.
• For child safety reasons do not leave polyethylene
bags used as packaging unattended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
• The unit is not intended for usage by children.
• Do not leave children unattended to prevent using
the unit as a toy.
• Do not allow children to touch the operating surface,
the unit body, the power cord or the power plug
during operation of the unit.
• Be especially careful if children or disabled persons
are near the operating unit.
• During the unit operation and breaks between
operation cycles, place the unit out of reach of
children.
• The unit is not intended for usage by physically,
sensory, psychically or mentally disabled persons
(including children) or by persons lacking experience
or knowledge if they are not under supervision of a
person who is responsible for their safety or if they
are not instructed by this person on the usage of the
unit.
• Before using the unit, examine the power cord and
the steam pipe closely and make sure that they are
not damaged. If you find that the power cord, the plug
or the steam pipe are damaged, do not use the unit.
• From time to time check the power cord insulation
integrity.