BRAYER BR4150, Instruction Manual

Page: 10 / 48

10 EN
place (5), you can put the iron on its base on a stable
surface.
• After you finish using the iron, set the temperature
control knob (9) to the position «MIN», press the on/
off button (12).
Note: Before switching the iron off, wait for a while
until the steam from the holes of the soleplate (6)
has stopped, otherwise, when the unit is switched on
again, drops of steam or water will be emitted from the
soleplate (6).
• Disconnect the power plug (13) from the mains
socket and wait until the iron soleplate (6) cools down
completely.
VERTICAL STEAMING
• Vertical steaming of fabrics or interior objects can be
performed only in the high temperature ironing mode.
Set the temperature control knob (9) to the positions
«•••» or «MAX».
• Hold the iron vertically at a distance of 5-20 cm from
clothes or interior items and press the steam supply
button (8) « », for constant steam supply press and
hold the button (8), steam will intensively come out of
the holes of the iron soleplate (6), to turn off steam,
release the button (8).
ATTENTION!
- Do not direct outgoing steam at people, animals,
plants or objects in the room which can be
damaged by hot steam and moisture.
- Do not steam synthetic materials as they may
be damaged due to the high temperature of the
outgoing steam.
- After vertical steaming iron the clothes item
several times without steaming.
- Do not steam clothes on a person. Use a clothes
hanger or a coat rack.
• After you finish vertical steaming, put the iron on the
steam station body (1) in the iron installation place
(5), wait for a while until the steam stops coming
out of the holes of the soleplate (6), press the on/
off button (12), remove the power plug (13) from the
mains socket and wait until the iron soleplate (6) has
completely cooled down.
AUTOMATIC SWITCH OFF
• If you do not press the steam supply button (8) «
» for 10 minutes, the steam station will switch to
standby mode, to exit standby mode, press the on/off
button (12) and wait for the bottom of the iron (6) to
heat up to the set temperature.
STEAM CHAMBER CLEANING
• To prolong the life of the steam station and maintain
good steam performance, use the descaling function
once every 2 weeks.
• Use the descaling function more often in the regions
with «hard» tap water.