05
-
2015 Rev.1
6.
50
Parte 6 Utilizzo
6.7.f Lifting/Lowering Operation
-
Press once the
P2
button, the LED will lighten to indicate
that the lifting/lowering function has been selected.
Note:
when the LED is blinking or off, to restart the func-
tion please press the button again.
-
The enable lever
P5a
of the joystick
P5
is used to enable
the controls of the joystick
P5
and must be kept pressed
when the joystick
P5
is used.
-
Move the joystick
P5
to lift or lower the basket.
-
Release the joystick to stop the vehicle during the lifting/
lowering phase .
6.7.g
If during the working there is the necessity to change place
use the joystick
P5
, that is to say press and keep pressed
the enable lever
P5a
of the joystick
P5
and move it de-
pending on the necessity after having pressed the
P3
but-
ton.
6.7.h
Once finished the work in that area or if you need to do a
new load proceed as follows:
6.7.i
Warning Danger of Crushing
Make sure that under the Platform there are no people,
animals or things .
6.7.l
Move the joystick
P5
and completely lower the Platform
and proceed with the work.
6.7.m
At the end of the work bring the Platform to the
Zero Pow-
er Condition
.
6.7.n
The
“
Operating Instruction
”
procedure is finished.
6.8 AT THE END OF WORKING DAY
6.8.a
Check the water level in the battery, and if necessary fill
up as described in the Section 9.6.
6.8.b
Check the battery charge state and if necessary recharge
as described in the Section 9.7
6.8.c
Clean daily as described in the Part 8
6.8.d
The
“
At the end of working day
”
procedure is finished.
P2
Q3
04
-
2020 Rev.01
P
ART 6 OPERATIONS