4.
34
Parte 4 Trasporto e Movimentazio-
05
-
2015 Rev.1
4.2 UNLOADING/UPLOADING PLATFORM
PROCEDURES WITH A FORKLIFT
4.2.a
The Platform can arrived:
4.2.a1
-
boxed with a pallet
4.2 a2 –
wrapped in cellophane with a pallet
4.2.a3 –
wrapped in cellophane without pallet
4.2.a1
-
Boxed with a pallet
To unload the Platform in a box with a pallet using a fork
-
lift , do as follows:
-
Place the forks of the forklift in the pallet.
-
Lift the box very slowly for about 10 or 20 cm and
…
-
Making sure that there are no people exposed, take the
box out of the truck or container and place it on the
ground.
-
Danger of cutting
Once placed it on the ground, the operator must wear cut
-
resistant gloves and with a suitable tool remove the lid,
therefore
-
Unscrew the screws on the wall and remove the 4 walls.
-
Danger of pollution
Do not throw the packing in the environment, but apply to
authorized disposal agencies or keep the package for fu-
ture transports.
-
Remove the forks from the pallet and
…
-
Insert the forks in the suitable housings of the Platform.
-
Making sure that in the area there are no people exposed,
lift up again very slowly the Platform for about 10 or 20 cm
and bring it near the area of use.
-
the unload of the Platform in the box with the pallet using
the forklift is done.
4.2.a2
-
Wrapped in cellophane with pallet
To unload the Platform with cellophane on a pallet using
the forklift do as follows:
-
Place the forks of the forklift in the pallet.
-
Lift up the Platform very slowly for about 10 or 20 cm and
…
-
Making attention that in the area there are no people ex-
posed, take the Platform out of the truck or container and
place it on the ground.
Danger of cutting
The operator must wear anti cut gloves
-
Take the scissors and cut the small bands
-
So, always making attention, lift up again the Platform
very slowly for about 10 or 20 cm and take it near the area
of use.
-
the unload of the Platform in the box with the pallet using
the forklift is done.
04
-
2020 Rev.01
P
ART 4 TRANSPORT AND HANDLING
