9.
65
Parte 9 Manutenzione Ordinaria
05
-
2015 Rev.1
9.10 INSPECTION
-
Introduction
The user/operator should not accept operating responsibility until the Manual has been read and ful-
ly understood as well as having operated the lift under supervision of an experienced and qualified
operator.
Only trained and authorized personnel shall be permitted to operate this machine.
This manual and its attachments should be considered integrant part of this machine and should re-
main with the machine all the time
.
As the manufacturer has no direct control over utilisation and application of this machine proper safety
practice are responsibility of the user and operating personnel, it is the responsibility of the operator to
perform a pre
-
start inspection and routine maintenance.
9.10a FREQUENT INSPECTION
-
FREQUENT INSPECTION CHECK LIST
WARNING
THIS INSPECTION MUST BE COMPLETED EVERY 3 MONTHS OF SERVICE OR 150 HOURS,
WHICHEVER OCCURS FIRST, OR IF A MACHINE HAS BEEN OUT OF SERVICE FOR GREATER
THAN 3 MONTHS. FAILURE TO DO SO COULD RESULT IN DEATH OR SERIOUS INJURY.
Owner or user is responsible for Frequent inspections
The inspection must be performed by a qualified technician, qualified as a mechanic, trained on the use
and maintenance of this specific make and model of aerial work platform.
Always keep inspection records up
-
to
-
date
Record and report all discrepancies and anomalies to your supervisor.
FREQUENT INSPECTION CHECK LIST
MODEL
______________________
SERIAL NUMBER
______________________
YEAR OF CONSTRUCTION
______________________
DESCRIPTION
______
1. Perform all checks listed on Pre
-
start Inspection
______
2. Check the oil level and status
-
be sure that the oil has a clear light colour.
______
3. Check the entire machine for signs of
damage, broken welds, loose bolt, improper or
makeshift repairs
______
4. Check that all adjustable flow valves are locked
______
5. Check that the basket with a full load does not lower
______
6. Inspect the motor and motor brushes
______
7. Check the electrical components and wires
for any damaged or oxidized part.
______
8. Check the demineralised water level in the batteries
DATE
SIGNATURE
INSPECTED BY
________________
_________________
________________
04
-
2020 Rev.01
P
ART 9 ORDINARY MAINTENANCE
