Braun NTF 3000, Manual

Page: 4 / 54

4
5
Remove cap
1
2
3
4
5
Power on
Press and release the power button once. Backlight will
come on and the start-up sequence begins.
NOTE: Make sure to remove the protective scanner cap
before taking a measurement.
When the thermometer is ready and correctly positioned,
a horizontal line of dashes (“---”) will appear on the screen.
How to use your Braun No touch + forehead
Fever guidance feature
Fever guidance helps you to better understand the meaning of your child’s temperature with the
color indicated on the display. The screen displays green if no fever, yellow when the temperature
is elevated and a red alert for a possibly high fever. 10 audible beeps indicate temperatures above
37.4 °C (99.4 °F) to alert the user that the patient may have a fever.
Color range Reading Meaning
Green
> 35.7 °C – 37.4 °C
(> 96.3 °F – 99.4 °F)
Acceptable
Yellow
> 37.4 °C– 38.5 °C
(> 99.4 °F – 101.3 °F)
Elevated
Red
> 38.5 °C – 42.2 °C
(> 101.3 °F – 108.0 °F)
Possible high fever
NOTE: Backlight remains OFF when below temperature readings are registered:
34.4 °C ≤ T ≤ 35.7 °C (93.9 °F≤ T ≤ 96.3 °F)
English
Position
Position thermometer on or up to 5 cm away
from the center of the forehead, just between
the eyebrows.
For No touch readings, the yellow guidance light
will show you where you are aiming.
If the eyebrow area is covered with hair, sweat
or dirt, please clean the area beforehand to
improve the reading accuracy.
It is important to hold the thermometer and
the forehead steady during measurement.
Movement will impact the temperature
reading.
0–5 cm
Yellow light
will show
you where
you are
aiming.
Take temperature
Press the temperature button (you can press and hold the button or
press and release it). When the thermometer is placed correctly, the
screen displays a dashed line animation while it takes a reading.
After the animation sequence (under 2 seconds), the display shows
the temperature reading. The appropriate fever light color is displayed
on screen and the confi rmation beep is heard.
If the thermometer is positioned too far
away from the forehead, it will prompt you
to move the thermometer closer by
displaying diagram and “0-5 cm”. Slowly
move the thermometer toward the
forehead until the horizontal line animation
starts and the temperature reading is displayed.
Read temperature
Remove the thermometer and read the temperature.
For low (no backlight) and acceptable (green backlight)
temperature range, you will hear a single long beep for
2 seconds. For elevated (yellow backlight) and possible high
fever (red backlight) temperature range, you will hear 10 short
beeps.
To repeat Go to step 3.
High
Elevated
Normal
Red
Yellow
Green
The No touch + forehead thermometer has been clinically tested and proven to be safe
and accurate when used in accordance with its operating instruction manual.
To turn off
Press the power button to turn off . Device will also shut off
automatically after 60 seconds of no use.
6