Page 20
Note:
Platform must raise
approximately
two inches
before
latch engages
fully
.
Outboard
Roll Stop
Fully-Unfolded Roll Stop
(Ramp position)
Fully-Folded
Roll Stop
(Up-vertical)
Disengaged
Roll Stop
Latch
Pre-L
i
f
t
Oper
ati
o
n
No
t
es
an
d
D
e
tai
ls
Lift Features
(continued)
Automatic Outboard Roll Stop
(ARS):
This cylinder-powered roll
stop provides a ramp for wheel-
chair loading and unloading at
ground level (see photos below).
When the platform lowers fully to
ground level, the cylinder com-
2"
Latch Foot
pression spring automatically
unfolds (rotates) the roll stop to
the ramp position (fully unfolded).
Although the outboard roll stop is
lift-powered, the activation of the
roll stop is controlled by the lift
operator (attendant). Pressing
the DOWN switch deploys
(unfolds) the roll stop. The roll
stop is cylinder-powered to
automatically fold (rotate) to the
vertical position as shown when
the UP switch is pressed (roll stop
raises before platform raises).
Discontinue lift operation
immediately if the roll stop
does not operate properly.
Fully-Engaged
Roll Stop
Latch
