Page 16
ing from the stowed position in
the event of platform drift. Due to
the “all-hydraulic” operation of the
dual-cylinder L915, hydraulic fluid
expansion, contraction or seep-
age may occur. Any of these
conditions may result in platform
drift (failure to hold the platform in
the folded or raised position).
Platform drift may occur during lift
shipment and/or between ex-
tended periods of non-lift use.
In the event that the platform
does not unfold when the
UNFOLD switch is pressed,
press the FOLD switch momen-
tarily to disengage the Lift-Tite
™
latches (platform drift has
occurred). Then, press the
Disengaged
Lift-Tite
™
Latch
Latch
Engagement
Pin (Roller)
UNFOLD switch to unfold the
platform to floor level (standard
operation).
When manually operating a lift
equipped with Lift-Tite
™
latches,
insert the pump handle in the
pump and stroke until the plat-
form folds fully (stops). Then,
open the hand pump valve (turn
counterclockwise) to unfold the
platform.
Pre-L
i
f
t
Oper
ati
o
n
No
t
es
an
d
D
e
tai
ls
Lift Features
(continued)
