MANUAL P/N 900000108 REV D
42
5.3
TELNET and Console Port Configurations
The TELNET and console port may be used to configure the ENTA. Both TELNET and console port
configurations use exactly the same commands.
5.3.1
Opening TELNET Session
To open a TELNET session, follow the given steps below.
1.
Go to the Start menu.
2.
Select Run.
3.
Figure 21
will be displayed. Type TELNET XXX.XXX.XXX.XXX and press the OK button.
The XXX.XXX.XXX.XXX is the IP address of the ENTA.
Figure 21 Run Screen
4.
Figure 22 will be displayed. Enter the username, press <Enter>, enter the password, and
press <Enter>. The TELNET session has now been established.
Figure 22 Telnet Interface
