MANUAL P/N 900000108 REV D
41
5.2
TCP 2500 Socket Interface
5.2.1
Opening TCP 2500 Socket Interface
To open the TCP 2500 socket interface, follow the given steps below.
1.
Go to the Start menu.
2.
Select Run.
3.
Figure 19
will be displayed. Type TELNET XXX.XXX.XXX.XXX 2500 and press the OK
button. The XXX.XXX.XXX.XXX is the IP address of the ENTA.
Figure 19 Run Screen
4.
Figure 20
will be displayed. The TCP 2500 socket interface has now been successfully
opened.
Figure 20 TCP 2500 Socket Interface
5.2.2
TCP 2500 Socket Interface Command List
The commands supported by the TCP 2500 socket interface are also supported by the telnet and
console port. Refer to section 5.3.2 for the command list.
