MANUAL P/N 900000108 REV D
32
5.1.5
Advanced
The Advanced tab consists of five sub-tabs, the 1PPS Output, Alarms, NTP Server, Plot, and SNMP.
This tab allows the user to clear a fault, set the 1 PPS output delay, manage alarms, set the leap
indicator, view cached and real-time time differences, and configure SNMP.
Figure 13 Advanced Screen
5.1.5.1
1PPS Output
Figure 13
is displayed when the 1PPS Output sub-tab is selected. This sub-tab allows the user to set
the 1 PPS output delay. To save all modifications made to the 1PPS Output screen, click the Submit
button. To undo all modifications made to the 1PPS Output screen, click the Reset button.
The 1PPS Output consists of two fields, the Input PPS and the IRIG Outputs. The Input PPS allows
the user to set the Input Cable Delay time in nanoseconds.
Please note that when the default Input PPS delay value is changed, the user may restore the default
Input PPS delay value by using the OSCDEFAULT command from the Telnet or TCP 2500 socket
interface. After restoring this value, manually recycle the power in the unit so that the change will take
effect.
IRIG Outputs can be enabled or disabled by means of the checkboxes on this screen.
