Brandt WTD 6284K, Manual

Page: 15 / 35

48
EN
3 / PREPARING YOUR LAUNDRY AND YOUR APPLIANCE
• LOADING YOUR LAUNDRY (continued)
• LOADING DETERGENTS
(Fig. 16)
Fig. 16
cl
•Measuring the detergent
The quantity of detergent to be used depends
on the hardness of the water, the degree of
soiling of your laundry and the size of the
load.
Always refer to the quantity recommenda-
tions given on the detergent packaging.
Warning: the recommendations of detergent
manufacturers are usually for a drum filled to
the maximum. Adjust your quantity in accor-
dance with the weight of laundry in the
machine.
These recommendations will prevent exces-
sive use of detergent which causes foaming.
Over-production of foam can decrease the
performance of your machine and increase
the wash duration and water use.
•Detergents for woollens and deli-
cate fabrics
When washing these fabrics, we recommend
using a suitable detergent (avoid putting it
directly in the drum as some of these pro-
ducts are aggressive to metal).
•For dryers :
Always adhere to the manufacturer's instruc-
tions when using softening products:
1 2 3 4
To achieve the best washing performance, after sorting and unfolding, place the laundry in the
drum, not piled up but spread out evenly. Mix large and small items to achieve the best spinning,
so there is no imbalance.
Important :
When closing the drum, be careful not to trap laundry between the two doors.
Pre-washing compartment
(powder)
Washing compartment
(powder or liquid)
Bleach compartment
Fabric softener compartment
Powder detergent
Liquid detergent
4
cl
3
2
1
Important :
— The "WASHING" compartment may contain powder and liquid; however, do not use liquid
detergent for programs WITH pre-washing or WITH “delayed start” (depending on model).
—
For correct filling of detergent compartments, place the lid in its maximum opening position.
— Do not exceed the MAX level.