Brandt WTD 6284K, Manual

Page: 21 / 35

54
EN
4 / PROGRAMMING YOUR APPLIANCE
• CHANGING A WASH PROGRAM
•During programming
All program changes are possible as long as
you have not yet pressed the
“Start /Pause”
button.
•After the cycle starts
After pressing the “Start /Pause” button
if you wish to change the type of tex-
tile (for example from “Cotton” to “Mixed” , etc
...), you must cancel the current program. To
do this, turn
the program selector to the
“OFF” position.
Then program your new choice and remem-
ber to confirm by pressing the
“Start /Pause”
button
.
F F
A A
F F
F F
This indicates that the new selection will not
be recorded.
However, the current cycle is not cancelled
and if you return the
program selector to
its original position, the cycle will resume its
normal course.
•Any time during the cycle
Depending on your model, the following chan-
ges are possible without pressing the
“ Start/ Pause ” button
.
— You can change the washing temperature
for the same type of fabric.
NB : If the temperature reached by the wash-
ing cycle is higher than your new choice, hea-
ting of the water stops immediately and the
cycle continues.
— You can change the spin speeds.
— You can select “Drain” or “Full tank stop” at
any time during washing.
— You can activate the (Rinse plus) option
at any time until the start of the rinse phase
(until the "Rinse" light comes on).
F F
A A
— You can deactivate all the options at any
time during the cycle as long as their action is
not already complete.
•During the period preceding the
actual start of the cycle
(when you have
chosen to delay the wash cycle).
— All program changes are recorded during
the wait period before a delayed start.
— You can change the duration of the
"Delayed Start" at any time during the wait
period preceding the actual start of the cycle.
To do this, press the
Delay start (+) or (-) but-
tons to choose a new value.
NB :
— During this period, the choice of a new time
cancels the previous selection. The new dura-
tion chosen is recorded as of the latest selec-
tion.
— If during this period you wish to completely
cancel the
"delayed start" , press one of the
Delay start (+) or (-) buttons until the
“Drying time” light goes off and the
“Remaining time” light comes on. Then, brie-
fly press the “Start /Pause” button .
The cycle will start immediately.
— You can activate or change the (Easy
F F
E E
E E
(Rinse plus) and (Drying) options at
any time during the wait period before a
"Delayed start”.
•At the end of the cycle
When the machine displays "StOP" you can
program a new cycle without returning the
program selector to the “OFF” position .
The machine is then ready to be reprogram-
med.
A A
NB : If you change a program
without cancelling, the machine
displays the following:
Ironing), (Prewash), (Intensive),