Brandt WTD 6284K, Manual

Page: 17 / 35

50
EN
4 / PROGRAMMING YOUR APPLIANCE
• PROGRAMMING A WASH CYCLE (continued)
Light on: option selected
Light off: option not selected
Throughout the cycle, the machine
indicates the current phase of the
cycle...
... as well as the estimated time
remaining until the end of the cycle.
•Operations to perform (continued) Display
— Turn the program selector to the “OFF” position
NB : Cancellation means you always have to re-program
from scratch.
If you have cancelled during washing, if you need to drain
the water, run a
“Spin” program and set a suitable
speed.
A A
All displays are extinguished
•Cancellation during programming, washing or
during pause
NB : After the spin, your washing machine automatically
cools the laundry and positions the drum with the opening
at the top for easier access to the laundry. This operation
lasts 3 minutes maximum.
The
display then shows “StOP” , which tells you the
cycle has finished.
— Turn
the program selector to the “OFF” position You
can then open the lid and remove your laundry.
A A
4 4
•Indication of End of cycle
NB : Choosing an
option changes the
cycle duration.
— If necessary choose options using the buttons. (see
chapter “DETAILS OF OPTIONS”).
Information :
You can select only the options compatible with the
program chosen.
D D
— Choose immediate start by pressing the “Start /Pause”
button ...
The cycle sequence indicator lights up.
The program begins.
NB : The duration displayed at the start of the program is
for information only. It will re-adjust a few minutes after the
cycle begins following estimation of the laundry load.
5 5
F F
— Or choose to delay your cycle by pressing the “Delay
Start” (+) or (-) buttons (refer to the chapter on
"OTHER FUNCTIONS" – “ Delayed start ”).
E E
A moving display (four little revolving
segments) shows the period of time
until the cycle starts.
2:10 = 2h10
(hour - minutes)
Display
Display