PC Elite Reference
Installation Guide
STEP 7 Now replace the system units cover by carefully sliding
in down and back over the system unit. Replace the cover
mounting screws.
STEP 8 After attaching all the monitor and keyboard cables, put
the MS DOS disk in drive A: and power up the PC. Do not
forget the mains power cable!
The PC should power on in the normal way.
Connecting To IEEE Devices.
__________________________
The PC ELITE IEEE board connects to IEEE 488 devices
using standard IEEE cables as shown in Figure 2-10.
You may find that our special low profile IEEE cable fits better!
Figure 2-10. An IEEE Cable.
_________________________
These cables can be ’piggy
backed’ together to daisy chain
up to 14 IEEE devices to the
PC. Connect one end of the
IEEE cable to the IEEE
device.
Our Low profile IEEE cables,
NOT shown, are ideal for
connecting to those tight fitting
clones! Ask you dealer today!
2-20
Chapter 2
