PC Elite Reference
Installation Guide
Installing The PC ELITE Board In The Computer.
____________________________________________
NOTE: Always turn the computer OFF before installing or
removing any interface board from the computer.!!!
After having made sure that the i/o address and the IRQ
and DMA jumpers are correctly set now is the time to insert the
PC ELITE card into the i/o connector slots in the computer.
STEP 1 Before the PC ELITE IEEE board can be installed
the power to the PC MUST be switched OFF!
Figure 2-6. Remove Cover Mounting Screws.
_______________________________________
STEP 2 Then
using a screw
driver, remove the
cover mounting
screws on the back
panel of the PC
system unit.
Figure 2-7. Removing The PC Cover.
________________________________
STEP 3 Next, remove the PC’s cover by sliding it forward and
up. It usually helps to disconnect the keyboard from the PC
since it tends to get in the way when the case is removed.
2-18
Chapter 2
