Installation Guide
PC Elite Reference
Figure 2-8. Removing Blanking Cover.
_________________________________
STEP 4 Choose an empty
expansion slot. The PC ELITE
IEEE card will fit either a full
length or a short slot, a 8 bit
PC type slot or a 16 bit AT
type slot. In general it is wise
to leave the larger slots free
for those boards that insist on
greater room. Remove the
blanking cover protecting the
slot on the PC back panel.
KEEP the blanking cover
screw safely for later.
Figure 2-9. Inserting The PC ELITE IEEE Card.
__________________________________________
STEP 5 Now insert the PC
ELITE IEEE card in the slot.
Be careful to ensure that the
gold plated pcb fingers fits
neatly into the i/o expansion
connector. Press down firmly
but evenly on the top of the
PC ELITE IEEE card.
STEP 6 The 24 way standard
IEEE 488 connector should fit
neatly through the slot’s
aperture to the outside world.
Use the screw kept back from the blanking cover to screw the
PC ELITE IEEE retaining bracket into the PC back panel
housing.
Chapter 2
2-19
