Brady Wraptor A6200, User Manual

Page: 18 / 65

Wraptor A6200 User Manual
11
Setup
Software for Creating Labels
3. Use the keyboard on the touch screen to type a name for the printer.
4. When finished tap .
When using Brady Workstation software on Wi-Fi, this name is shown when selecting a printer. See
“Software for Creating Labels” on page 11
and
“Connecting the Printer” on page 12
.
Software for Creating Labels
Install labeling software on your computer, set up the connection to the printer, then use the software
to design labels and send them to the printer.
Brady Workstation software provides a variety of apps to simplify label creation for specific purposes. It
also provides easy-to-use apps for custom label design. The printer comes with a license for the Brady
Workstation Product & Wire Identification Suite.
To install the Product & Wire Identification Suite:
1. Make sure your computer is connected to the internet.
2. Go to
workstation.bradyid.com/PWID .
3. Follow the instructions on the screen to download and install the software.
4. When you run the software and open an app that requires activation, follow the instructions on
the screen to activate the software. Use the license ID and password on the printed insert that
came with the printer.
For other Brady Workstation software or additional licenses, go to www.workstation.bradyid.com or
contact your Brady representative.