
8
EN
Basic glossary
1
LCD panel:
the illuminated panel that displays information on the status of
the machine.
2
Control wheel:
the metallic wheel for browsing through the different
menus.
3
SD slot:
the slot where the SD card is inserted, located inside the printer, at
the top of the control panel.
4
Print bed:
the glass rectangle with a metallic base that serves as a support
during printing.
5
Hot-End:
a component consisting of a heater block, PTFE tube, heat
cartridge, thermistor and metallic nozzle which reaches high temperature
and expels the melted filament.
6
Extruder:
a component consisting of the hot-end, the filament traction
motor, the blower and fans.
7
Reel of filament:
a reel of different materials of 1.75 mm diameter such as,
PLA, wood or copper.
8
Reel-holder:
the metal part that supports the reel at the rear of the printer.
9
Fibonacci guide:
a plastic tube that serves to guide the filament towards
the extruder. The form enables it to adapt to the movements of the printer
and to protect the filament.
10
Power inlet:
located at the rear of the printer.
11
Power switch:
the button for switching the Witbox 2 on and off.
12
USB port:
the USB cable connector situated on the right side of the printer.
Summary of Contents for witbox 2
