bq witbox 2, Quick Start Manual

Page: 15 / 36

14
EN
Installing the support and the reel
The reel of filament must be fitted onto the rear support. Attach the metal support
by inserting the short end into the slot at the back. Remove the plastic wrapping
from the reel and place it onto the support. The filament is loaded later.
Connecting the power supply
Before connecting the power cable, make sure that the switch is in position “0”.
First plug the connector into the printer and then plug the other end into the
mains.
Packing your Witbox 2 for transportation
If you will be transporting your printer, follow the instructions in the Unpacking your
Witbox 2 section in reverse order to prevent it from being damaged during transit.
If you need to send your Witbox 2 printer to our technical support service for repair, we
remind you that BQ accepts no liability for damage to the product resulting from failure
to pack it correctly on the part of the Customer, who must bear the cost for any such
damage. We therefore request that you keep the original box along with all the protective
packaging included, and that you unpack your printer according to the instructions. Any
return with boxes or protective packaging other than the original ones is made at the risk
and the expense of the Customer.