bq witbox 2, Quick Start Manual

Page: 24 / 36

23
EN
Use and Maintenance of Your
Witbox 2.
Importance of correct use and maintenance
By using your printer correctly, problems can be avoided in the future. A basic
maintenance kit is included with the printer, which consists of four Allen keys,
two cleaning needles and five spare PTFE tubes.
Online material
Before starting any maintenance, we recommend that you click on the link below
to access material and information on how to carry out these tasks with
maximum safety:
goo.gl/MnzhyX
Cleaning the Hot-End
It is important to remove any remaining material that has accumulated around
the nozzle after continuous use of the machine. Heat up the hot-end and you can
either use the metal bristle brush provided or simply some needle-nose pliers to
clean it out. Keeping this part clean will prevent the extruded material from
sticking to the nozzle rather than the print bed.