28
43
44
between16.1 °C and 19.9 °C. If you want a different tem-
perature range for T2, for example 21°C, the range for T3
will automatically be placed at 21.1 °C.
7.6-
Repeat the operations described in points 7.4 and 7.5
to change the values for the other temperature ranges.
The entire graph of the daily programme reappears to
confirm that programming of temperature ranges has con-
cluded.
In any case, after 10 seconds from the last action, the unit
exits the procedure and accepts as valid the data inserted
up to that moment.
7.7-
Re-insert the unit body.
ATTENTION.
The temperature set for the lowest range (T1)
must be greater than the calibration value (if different from
the default value of 0 °C, see chapter 15).
8
-
CUSTOMIZATION OF THE TEMPERATURE
LEVELS FOR THE COOLING PROGRAMME
Extract the body of the unit. Select cooling mode . Then
set the desired temperature levels in the same manner
as set forth from point 6.3 on. Re-insert the body of the
unit.
TH350 EN 05_08.indd 28
TH350 EN 05_08.indd 28
30-05-2008 8:20:52
30-05-2008 8:20:52