42
83
84
82
Fixed-time manual programming by remote control
20.1-
Make sure you are in MANUAL mode and select the
HEATING or COOLING mode to which the set tempera-
ture is to apply. If you wish to set a shutdown time, you
will need to select SYSTEM BYPASS in the HEATING pro-
gramme (see chapter 11) or SYSTEM BYPASS in COOLING
mode (see chapter 12).
20.2-
Set the desired temperature using the button
or (fig. 79) or go to the next point if you have selected
SYSTEM BYPASS.
20.3-
Press button
once to set the hours (fig. 80),
twice to set the days (fig. 82).
On the display, instead of the current time, the message
will appear if you are setting the hours, or
if you
are setting the days.
20.4-
Press button or until you reach the desired
hours (fig. 81) or days (fig. 83) from 1 to 99.
20.5-
To save the set programme as a programme which
can be remotely activated, press the button .
This setting cannot be verified by telephone.
21
-
RESET
Operating anomalies, repairs and other technical reasons
may make it necessary to reset the unit.
For this purpose, proceed as follows:
21.1-
Extract the unit body.
21.2-
Press button
R
(fig. 84).
21.3-
Re-insert the body of the unit.
TH350 EN 05_08.indd 42
TH350 EN 05_08.indd 42
30-05-2008 8:20:57
30-05-2008 8:20:57
