7
INDICATIONS AND EXTERNAL CONTROLS
(see fig. 1)
INDICATIONS
1
0 ÷ 23
Hourly scale in the graph of the programme.
The flashing cursor indicates the time corre-
sponding to the clock time.
2
Temperature range T1.
3
Temperature range T2.
4
Temperature range T3.
5
1÷7
Days of the week.
6
Indication of battery charge status.
7
Digital clock.
8
Indication of system bypass.
9
Indication of activation of all-purpose pro-
gramme.
10
Indication of on-off time delays.
11 Indication of manual operation.
12 Indication of remote activation.
13 Indication of system bypass with anti-freeze
protection.
14
Indication of COOLING programme.
When the cooling system is in operation, the icon is
animated.
15
Indication of HEATING programme.
When the heating system is in operation, the icon is
animated.
16
Digital thermometer.
17 Button to increase temperature, day, time, etc.
18
Button for selecting MANUAL, AUTOMATIC, or
SYSTEM BYPASS.
19
Temperature measurement sensor.
ATTENTION. Touching the sensor will cause
incorrect temperature measurement.
20
Tab for extracting the main body from the
frame.
21
Button for activation of ALL-PURPOSE pro-
gramme or MANUAL/BYPASS OF TIMER-
CONTROLLED system.
22 Button to increase temperature, day, time, etc.
23
When this warning appears, it means the batter-
ies are low
.
INTERNAL CONTROLS
To access the internal control buttons, extract tab
L
and
then the body of the unit from the frame until it stops, as
shown in the sequence in fig. 2.
24
R
Reset.
25
Setting of the clock and of the on/off
delay time.
26
P
Programming of temperature in the three
ranges T1, T2, T3.
Setting of operating parameters.
TH350 EN 05_08.indd 7
TH350 EN 05_08.indd 7
30-05-2008 8:20:47
30-05-2008 8:20:47