No Sound
The Player Does Not Respond to the
Remote Control
♦ Check the audio connections.
♦ Aim the remote control directly at the
sensor on the front of the player.
♦ Remove any obstacles which may
interfere with the signal path.
♦ Inspect or replace the remote control
battery.
♦ The disc format is not according to the TV-
set used (PAL/NTSC). Select the proper
setting in the TV SYSTEM menu.
♦ Check the digital connections.
♦ Check the Digital Audio menu to make
sure that the digital output is correctly set.
♦ Check if the audio format of the selected
audio language matches your receiver’s
capabilities.
♦ Press Reset button on the front panel of
the Disc player.
Picture is distorted or Only Black and
White
No Audio at Digital Output
Buttons Do Not Work
GENERAL
Disc PLAYER
RADIO
FM
Power Supply Requirements
DC 12 Volts, Negative Ground
Chassis Dimensions
178(W)x160(D)x 50(H) mm
Tone Controls
- Bass (at 100 Hz)
±10 dB
- Treble (at 10 KHz)
±10 dB
Maximum Output Power: 4x40 W
Current Drain:
15 Ampere (max.)
Signal to Noise Ratio:
> 50 dB
Channel Separation:
> 40 dB
Frequency Response: 20Hz - 20 KHz
Frequency Range: 87.5 - 107.9 MHz
IF:10.7 MHz
Sensitivity (S/N=30dB):
4μV
Stereo Separation:>25dB
Discs/files played: Disc,VCD,SVCD,CD-
DA,CD-R/RW/MPEG4/MP3/WMA
Screen: 3.0 inch wide liquid crystal panel
Resolution 240RGB
400 pixels
Frequency Range: 530 - 1710 KHz
IF: 450 KHz
MONITOR SCREEN
AM
:
X
Specifications
Page 25
