“Progressive” (typically used for website
display) or “lossless” (an older format
which is rarely used today) JPEG files
cannot be played. So be sure you are
saving the files in the proper format. If
you play a progressive or lossless JPEG
image, a black screen will appear. When
you next select a baseline image, you
may experience some delays.
- This unit can play back MPEG 1 or 2
files with the extension code <.mpg>.
- Audio stream should conform to MPEG1
Audio Layer 2.
Disc players and discs all have
“REGION CODES.” If the region code
number on the disc does not correspond
to the region number of this disc player,
the unit cannot play the disc.
The current disc has a “Parental
Control” level, and the player ’s parental
level is set below the level of the disc. To
view this disc, you should enter the
correct password to play the disc
normally.
Playing MPEG discs
Frequently Asked Questions
Q: I inserted a disc, but it cannot be
played. The message “REGION
ERROR” is displayed.
A:
Q: When I insert a disc, there is a
window shown on the screen for me to
enter a 4 character password. Why?
A:
If it appears that your car disc player is
faulty, please first consult this checklist.
It may be that something simple has been
overlooked.
Under no circumstances should you try
to repair the player yourself, as this will
void the warranty. Only qualified service
personnel may remove the cover or
service this player.
♦ If the power supply is connected to the
car accessory circuits, but the engine is
not turned on, switch the ignition key to
“ACC.”
♦ Check if the fuse is blown. Replace
with a new fuse if necessary.
♦ Check if the POWER button on the front
of the player is set to ON.
♦ Check if the monitor or TV is switched
ON.
♦ Check if select proper mode has been
selected (such as Disc Play mode or AV
mode).
♦ Check the video connections.
♦ Check the disc for fingerprints and
clean it with soft cloth, wiping from center
to the edge.
♦ Sometimes a small amount of picture
distortion may be present. This is not a
malfunction.
♦ The disc format is not the same as the
TV-set used (PAL/NTSC). Select the
proper setting in the TV SYSTEM menu.
♦ The disc format is not the same as the
TV-set used (PAL/NTSC). Select the
proper setting in the TV SYSTEM menu.
♦ Be sure that the disc label faces up.
♦ Clean the disc.
♦ Check if the disc is defective by trying
another disc.
No Power
No Picture
Distorted Picture
Completely Distorted Picture
No Color in Picture
Disc Does Not Play
Trouble shooting
Page 24
