BT hands-free function
When link up your mobile phone to this BT
hands-free system, you can dial or receive
calls via this BT device during driving.
You can also transmit the audio data(music)
from a mobile phone to the car radio via this
BT device.
Sound and picture will be automatically off
when there is an in-coming call. Voice
comes out from your car speakers and the
built-in microphone receives your voice.
(See the menu of the hands-free system).
Before you use BT free-hands system,
between this BT free-hands system and
your BT mobile phone must be connected
with each other. This process is called
“Pairing”.
1.Turn your BT mobile phone on and
activate pairing mode. Now your BT mobile
phone searches for BT devices in the
reception range. When mobile phone detect
the hands-free sytem, the “CAR BT”(name
of the free-hands system) will appear on the
screen of the mobile phone.
2. Once the BT free-hands was found,
please enter the pairing code “0000” to
connect both devices with each other.
When you switch the car disc player into
standby mode, then turn it on again, the BT
module can establish BT connection
automatically
If connecting success, “CON OK”,
“CONNTED” will be visible on the LCD
display, and the “BT” will twinkle
continuously on the LCD display.
Otherwise, it will appear “CONT DOWN”,
“NO CONT” on the LCD display. Meanwhile,
the “BT” will not twinkle continuously on the
LCD display.
You have to active automatic call
reception so that the mobile phone
accepts incoming calls automatically
In many countries, this is a prerequisite
for legal operation of hands-free
equipment while driving.
1. Pairing
2. CONNECT
.
3. DIAL CALL
0~9 , #
*
+
DEL
4. Caller ID
5. Accepting an incoming call
6.Rejecting an incoming call
7. Terminating a call
8. Call Transfer
9. BT MENU
BT MENU
PRESET
RECEIVE
DIALED
3.1 Dial with the mobile phone directly.
3.2 Dial with the remote controller.
3.2.1 After connecting, press the “
”
or
push button on the remote control to enter
telephone number .
- Pressing and holding the
button on the
remote control when you want to input “ + ”.
- Simultaneously, the entered number will
be appeared on the touch screen.
- If a number is wrongly input, press the
button on the remote control to delete
the incorrect number.
3.2.2 Press the “
” button on the front
panel or remote control to dial.
When a ring comes, the caller ’s numbers
will be shown on the touch screen, you can
decide whether or not to answer, so you
avoid unnecessary trouble and disturb.
If the automatic call accept function is not
activated,when a ring comes, press the “
”
button on the front panel or remote control
to switch on the calling.
When a ring comes, press the “
” button
on the head unit or remote control to reject
the coming call.
During a phone call, press the “
” button
on the front panel or remote control to hang
up the current call.
During a phone call, you can transfer the
call to your mobile phone or the hands-free
system by pressing the “
” button on the
front panel or remote control.
At connect status, press the
button on the remote control to enter
BT menu. The structure of the BT menu as
follows:
(Preset phone number) :
List of saved phone number, you can save 6
phone numbers total.
(Received phone number):
List of the latest 6 received calls.
(Dialed phone number):
Page 18