50
4. Using a #2 Phillips screwdriver, remove the 3 indicated screws from the
Left Upper Shroud. Use a flathead screwdriver to separate the Shrouds at
the push fasteners. Remove the Left Shroud and set it safely aside.
5. Disconnect the cables from the Engine Assembly and the Console Mast
cables. Tie one piece of string to the Mast Cable end at the base of the
Console Mast.
NOTICE:
Do not crimp the cables. Do not allow the cable to fall down into
the Engine Assembly. This step may require two people.
X3
Summary of Contents for LateralX LX3
Page 54: ...54...
