Bowflex LateralX LX3, Service Manual

Page: 5 / 54

5
Moving Your Machine
The fitness machine weighs approximately 224 lbs (102 kg) when fully assembled and requires caution when being moved. The width of the machine
is wider than a standard room door frame. Disassembly may be required if transporting to a different area.
Always disconnect the power adapter from the wall outlet and the machine before attempting to move the machine.
Use the Transport Handles at the rear of the machine to lift and move the machine. Your machine can be rolled on the transport wheels to a new
location. Lower your machine slowly into its new location without injury to your head or fingers.
Do not use the handlebars, Console Mast, or the Console to lift or move the machine. Injury to you or damage to the machine can
occur.
The machine may be moved by one or more persons depending on
their physical abilities and capacities. Make sure that you and others
are all physically fit and able to move the machine safely.
Place the machine on a clean, hard, level surface, free from
unwanted material or other objects that may hamper your ability
to move freely. A rubber mat should be used below the machine to
prevent the release of static electricity and protect your flooring.
To prevent unsupervised operation of the machine always
disconnect the power cord from the wall outlet and machine power
input. Place the power cord in a secure location.
Leveling the Machine
The machine needs to be leveled if your workout area is uneven or if the
Base Assembly is slightly off the floor. To adjust:
1. Place the machine in your workout area.
2. Loosen the locking nuts and adjust the levelers until they all contact
the floor.
Do not adjust the levelers to such a height that they detach or
unscrew from the machine. Injury to you or damage to the
machine can occur.
3. Adjust until the machine is level. Tighten the locking nuts.
Make sure the machine is level and stable before you exercise.