30
21. Put the new Crank arm in position on the Crank pulley.
22. Remove the M10 x 50 screw and M8 washer from Crank arm. Using
an 8mm hex wrench, install the screw from the unthreaded end of the
screw hole through the gap and tighten securely.
23. Using a 13mm socket wrench, install the M8 x 20 hex screw and
washer into the crankshaft and tighten securely.
Reassembly
If you only replaced the Right Crank, go to step 26.
If you replaced the Left Crank, continue to step 24.
24. Using a Phillips screwdriver, attach the Left Lower Shroud, to the main
frame. First, lock the screw in position A, then lock the screw in position B,
and then tighten the screws in the other positions.
A
B
Summary of Contents for LateralX LX3
Page 54: ...54...
