13
X2
X6
4. Using a #2 Phillips screwdriver, remove the 6 indicated screws (ovals
and arrows) from the Upper Shrouds. Use a flathead screwdriver to
separate the Shrouds at the push fasteners. Remove the Shrouds and
Mast Gasket, and set them safely aside.
5. Using a 6mm hex wrench, remove the indicated hardware. Rotate the
Lateral Links out of the way.
6. Remove the Endcaps from the Mid Pedal Arms. Using a 13mm socket
or box end wrench, remove the indicated hardware.
Note: The hardware is very tight (factory installed).
Summary of Contents for LateralX LX3
Page 54: ...54...
