Page 2
9e1072
PREFACE
These instructions are supplied with the product. They should be kept close at hand and remain with the equipment even if the equipment is sold. These instructions aim to aid those
responsible (outlined under “Responsibilities”) for installing, operating, maintaining, troubleshooting, and servicing this product. This manual is not covered by an amendment service. The
current version can be obtained through your technical dealer or directly from BouMatic.We reserve the right to make changes of the data and illustrations in this manual due to technical
developments.Reproduction, translation or copying in any form, including extracts, requires written authorization from BouMatic.
Instructional Content and Purpose
These instructions aim to aid those responsible (outlined under “Responsibilities”) for installing, operating, maintaining, troubleshooting, and servicing this product.
CUSTOMER SERVICE
If necessary, please contact your nearest authorized dealer.
GUIDELINES, LAWS, STANDARDS
During the design and construction of this product, the contents and information from the following guidelines and specifications were followed:
2006/42/EC Machinery Directive 2006/95/EC Low Voltage Directive 2014/30/EU EMC Directive
EN 61000-6-2 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
EN 61000-6-4 Electromagnetic compatibility (EMC) -- Part 6-4: Generic standards - Emission standard for industrial environments
EN 60335-2-70/A1 Household and similar electrical appliances - Safety - Part 2-70: Particular requirements for milking machines
EN 13849-1 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design
EN 13849-2 Safety of machinery - Safety-related parts of control systems - Part 2: Validation
EN 60204-1 Safety of machinery - Electrical equipment of machines - Part 1: General requirements EN 60335-1 Household and similar electrical appliances - Safety - Part 1: General require-
ments
EN 12100 Safety of machinery - General principles for design - Risk assessment and risk reduction
Responsibilities
Procedures in these instructions are to be performed according to applicable codes (state, local, and other) by the person(s) qualified (licensed, if applicable) to do so —that is:
• Welding must be done by a qualified welder;
• AC power wiring for voltages over 40V (50V in Europe) must be done by a qualified (licensed) electrician in compliance with the latest edition of the ANSI/NFPA Standard 70,
National Electrical Code, (USA) or either LVD 2006/95/EC or EMC 2004/108/EC (Europe) and in compliance with the local wiring codes as applicable;
• Other installation, major maintenance, and service work must be done by an authorized BouMatic dealer;
• Product/system checkout and troubleshooting steps are to be performed by an authorized BouMatic dealer;
• Deviation from these instructions could affect product performance or create a hazardous situation. Under no circumstances will BouMatic be responsible for any problems caused
in whole or in part by and deviation from the procedures specified in these instructions without prior written approval from BouMatic;
• Operation steps may be performed by the owner/operator after the dealer or technician has successfully finished the product/system checkout. The owner/operator is responsible
for properly operating, maintaining, and monitoring the product/system to ensure that it works properly.
Close compliance with the procedures herein is essential for the owner to get maximum benefit from the product/system.
Disclaimers
No warranties are contained in these instructions. The division of responsibilities, stated above, is a general reminder of those provisions in the applicable dealer contract and does not
change any agreement between BouMatic and the dealer. Information in these instructions is not all-inclusive and cannot cover all unique situations.
BouMatic Global Headquarters
PO Box 8050
Madison, WI 53708-8050
USA
Tel: 608.222.3484
Fax: 608.222.9314
BouMatic Europe
Transportweg 6
8304 AX Emmeloord
The Netherlands
Tel: +31 (0)527 78 85 00
Fax: +31 (0)527 78 85 99
BouMatic Gascoigne Melotte Sprl.
Rue Jules Melotte 31
4350 Remicourt
Belgium
Tel: +32 19 54 42 66
Fax: +32 19 54 55 44
BouMatic A.S.
Jernvej 2
6900 Skern
Denmark
Tel: +45 7694 5525
Fax: +45 7526 0396
