37
Figure 20.
About Screen
Use the About screen to perform the following actions:
•
Change the name of the institution. Select the value box next to Institution.
Refer to detailed instructions for entering new data using the keyboard
window (Figure 14 Keyboard Window Example on page 32).
•
View the LATITUDE Programming System model and serial number
information.
•
Select the System Information tab and view the LATITUDE Programming
System information including the version numbers of the system software
and the installed software applications.
•
Print the LATITUDE Programming System information (known as the
About report).
–
From the About screen (see Figure 20 About Screen on page 37)
select a printer (USB or Bluetooth
®
), number of copies, and then
select the Print button.
NOTE:
The printer (USB or Bluetooth
®
) selected in the Patient Data
Management application (Model 3931) is the printer that displays in the
About screen.
NOTE:
If no printer is available, the About report can still be saved to an
attached USB pen drive by pressing the Print button.
NOTE:
If a USB pen drive is inserted in the Model 3300 Programmer
when the About report is created, the report is converted to a PDF and
saved to the USB pen drive.
Selecting a PG
To select a PG, first select the Select PG button, shown at the bottom of Figure
20 About Screen on page 37, to display the SELECT PG screen.
