33
MACHINE SET UP GAS MIG WELDING CONTINUED
14
Fit gas regulator to the gas bottle and install
gas hose to the gas inlet on the back panel of
welder.
Turn on regulator and set gas flow to between
10-15 L/min depending on your welding
environment.
13
Note:
It is advisable to run a few test welds
using scrap or offcut materials, in order to
tune the machine to the correct settings
prior to welding the job.
IMPORTANT! -
We strongly recommend that you
check for gas leakage prior to operation of your
machine. We recommend that you close the cylinder
valve when the machine is not in use.
BOSSWELD authorised representatives or agents of
BOSSWELD will not be liable or responsible for the
loss of any gas.
