17
SPOOL
GUN
SPOOL
GUN
SPOOL
GUN
SPOOL
GUN
SPOOL
GUN
SPOOL
GUN
SPOOL
GUN
SPOOL
GUN
SPOOL
GUN
START CURRENT PERCENT
In 4T trigger mode, sets a welding current 10-200% of the main welding
current activated when the trigger is held on to ‘latch’ the trigger before
the main weld current is started. When trigger is released, the current will
go through the upslope period if it is set, to the main welding current
Adjustable from 10 - 200%
START CURRENT ARC LENGTH
Exists in S4T welding mode, excessive arc length will lead to spatters
and unsightly welds, so it is necessary to set reasonable quantity.
Adjustable from -10 - +10
END CURRENT PERCENT
In 4T trigger mode, sets a welding current 10-200% of the main welding
current activated when the trigger is held on to ‘unlatch’ the trigger before
the weld is finished. If downslope is set, the current will go through the
downslope period before going to the end current set.
Adjustable from 10 - 200%
END CURRENT ARC LENGTH
Exists in S4T welding mode, excessive arc length will lead to spatters
and unsightly welds, so it is necessary to set reasonable quantity.
Adjustable from -10 - +10
HYDRO-COOLING
Select water cooling ON or OFF
SPOOL GUN
Spool Gun ON or OFF
HOT START
Electrode preheating on the weld start. Makes electrode priming
easier and prevents it from sticking when cold
Adjustable from 0 - 10
ARC FORCE
Also called Dig and Arc Control. Gives a power source variable addi-
tional amperage during low voltage (short arc length) conditions. Helps
avoid “sticking” stick electrodes when a short arc length is used.
Adjustable from 0 - 10
DOWN SLOPE
Selection for the transition time from Peak Amperage to Finish
Amperage.
Adjustable from 0 - 10
SPOOL
GUN
FUNCTION BUTTON
Press to the function button to exit settings
