20
SPOOL
GUN
1
2
3
4
6
7
5
PANEL DESCRIPTION
1.
Hot Start / Arc Force Parameter Code Display.
2.
Welding Current.
3.
Welding amperage Indicator Light.
4.
MMA Function Select.
5.
Hot Start / Arc force Parameter Select press to Enter and Exit.
6.
Hot Start / Arc force Code Select turn Knob Left or Right.
7
Welding Current / Hot Start / Arc force, Turn Knob Left or Right to set to desired setting.
Set up installation for MMA Welding
1. Connection of Output Cables
Connection of Output Cables Two sockets are available on this welding machine. For MMA welding the electrode
holder is shown be connected to the positive socket, while the earth lead (work piece) is connected to the negative
socket, this is known as DCEP. However various electrodes require a different polarity for optimum results and
careful attention should be paid to the polarity, refer to the electrode manufacturers information for the correct
polarity.
DCEP: Electrode connected to “+”output socket.
DCEN: Electrode connected to“-” output socket.
1. Turn the power source on and press the TIG/MMA/MIG button to select the MMA function.
3. Set the welding current relevant to the electrode type and size being used as recommended by the electrode
manufacturer.
4. Set the Hot Start and Arc Force as required using the button and knobs.
5. Place the electrode into the electrode holder and clamp tight.
6. Strike the electrode against the work piece to create and arc and hold the electrode steady to maintain the arc.
MMA FUNCTION - FRONT PANEL DESCRIPTION
