- 22 -
4.2
Operation
4.2.1 Inserting and removing the battery
• In order to insert the battery (1), align it so that it can be easily pushed onto the mount
-
ing provided along the plastic guide. After sliding it on completely, the fastening clip (2)
must lock the battery firmly and properly into place in the tool housing.
• In order to remove the battery push the fastening clip on the front side of the battery
down and pull the battery forward and off.
• Don't use force to install the battery. If the battery can not be easily pushed on it was not
correctly positioned.
NOTE
Always push the battery all the way in until it locks into place with a click.
WARNING
Risk of injury from falling battery
If the battery is not correctly locked it can fall out and cause injuries.
• Always ensure that the battery is fully locked into place.
1
2
1) Battery
2) Fastening clip
