- 25 -
4.2.6 Empty remaining collection container
The riveting mandrel container for the torn off riveting mandrels must be emptied
regularly. Turn the container by hand approx. 45° „counter clockwise“ or „clockwise“ in
order to loosen it and remove it from the riveting machine.
In order to place the riveting mandrel container back on after emptying align the noses
and turn the riveting mandrel container approx. 45° until it locks into place and is flush
with the riveting mandrel container mount on the tool.
NOTE
Blockage of the riveting mandrel container must be avoided, otherwise the
tool could be damaged.
The tool has a reminder function for emptying the riveting mandrel container. To this
end the emptying of the mandrel container can be set with the „Service“ user in the
SmartTool-Manager.
In addition a minimum time for emptying can be set. This can prevent an employee from
briefly turning the riveting mandrel container back and forth, instead of emptying it.
45°
