- 31 -
The pressure trigger can not be used in the following tool types due to the system:
• BST-RTB-EX-1
• BST-RTB-EX-2
• BST-RTB-HUCK
• BST-RTB-Cherry
4.2.12 QuickRiv-Technology
The tool has a monitor which automatically recognises when the rivet mandrel breaks
and returns the tool back into the starting position. Depending on the traction head or
fastener, the break detection must be deactivated. This can be done in the SmartTool-
Manager.
In order to deactivate the break detection read out the tool in the SmartTool-Manager as
described in chapter 4.4.17 on page 40.
• Click „programming“
• Select the program, for example program 1, in which the pressure trigger should be de
-
activated
• Click „option“
• Remove the check mark next to „QuickRiv-Technology“ (see image)
• Click „write“
