- 61 -
stroke
„S
Target
“
S
Target
describes the stroke that the tool should travel in this step. When
this value is reached, the tool changes to the next step.
„S
limit
“
S
Limit
describes the max. stroke the tool may cover in this step. When
this value is reached, the tool stops and displays an NOK error message.
current
„I
Target
“
I
Target
describes the stroke that the tool should travel in this step. When
this value is reached, the tool changes to the next step.
„I
Start
“
If I
Target
is activated, I
start
appears. This value defines the point at which the
travel measurement for the setting step is to be started.
„I
limit
“
I
limit
describes the max. current that the tool can reach in this step. When
this value is reached, the tool stops and displays an NOK error message.
DANGER
Risk of injury due to incorrect parametrisation
Incorrect parametrisation can lead to injuries or damage
• Settings may only be made by experienced users.
time
„T
Target
“
T
Target
describes the time for which the tool should run in this step. When
this value is reached, the tool changes to the next step.
„T
limit
“
T
limit
describes the max. time that the tool can run in this step. When
this value is reached, the tool stops and displays an NOK error message.
switch
„pressure trigger“
If the Pressure trigger function is activated in the step, the pressure
trigger must be activated. Default: deactivated
„final switch“
The limit switch function must always be activated so that the tool
cannot move onto the block.
evaluation
„force“
The force value determines the force range in which the operating point
must lie and evaluates the riveting process with OK or NOK.
