1 695 655 779
2010-11-9
|
Robert Bosch GmbH
26 | WBE 4140 | WBE 4140
en
2.
WBE 4140
651046-01_Mi
1
3
4
5
6
8
7
10
9
11
2
12
14
13
15
Fig. 1:
WBE 4140
Item Designation
Function/purpose
1
TFT monitor
Software display (measured values and operating instructions)
2
Wheel guard
R
Protection of operator against flying particles (e. g. dirt, water).
R
Starting and stopping measurement, refer to Section 8.3.3.
3
Gauge arm (accessory)
Determination of rim width
4
Vernier caliper (electronic)
R
Recording of rim distance and rim diameter.
R
Determination of positions for attachment of adhesive weights.
5
Cone of drive shaft
Flange mounting.
6
Pedal
Locking of shaft / wheel.
7
Control panel
Operation of WBE 4140, refer to Section 7.3
8
Tray
For storing balance weights and accessories.
9
Mains socket
Connection for power cord.
10
On/off switch
Switching WBE 4140 on and off.
11
Centering flange
Wheel attachment.
12
Quick-action clamping nut
Centering and attachment of wheel on cone.
13
Manual vernier caliper
Can be used as substitute if the electronic vernier caliper is defective.
14
Measuring compasses
Can be used as substitute if the rim width and rim diameter cannot be recorded
electronically.
15
Clamping tool holders
For storing accessories.
