34
en | Cable and Wire Standards
AutoDome Pipe Mount
F.01U.251.410 | 1.0 | 2011.08
Installation Guide
Bosch Security Systems, Inc.
3.3.3
Using Ethernet to Transmit Video and Control
The AutoDome VG5 700 series connects to a 10 Base-T/100
Base-TX network either directly or via a switch. Both video and
control are transmitted over a standard TCP/IP network using
the built-in Web server.
3.3.4
Using Multi-mode Fiber Optic to Transmit Video
and Control
Fiber Optic kits, available for AutoDome 100 and 600 Series
cameras, transmit both video and Biphase control over an
analog singlemode or multimode fiber.
CAUTION!
Ethernet connections must be made to non-exposed (indoor)
networks only.
Cable Type
CAT-5E or CAT 6 Ethernet
Maximum Distance
100 m (328 ft)
Bandwidth
10 Base-T/100 Base-TX
Terminal Connector
RJ45, Female
WARNING!
Do not connect a coaxial cable while the RJ45 Ethernet cable is
connected.
Multimode
Fiber Type
50/125 µm, 62.5/125 µm, low loss multimode glass
fiber
Maximum Distance
4 km (2.5 miles)
Minimum Bandwidth 20 MHz (Video - 850 nm / Control - 1300 nm)
Requirement
Bosch LTC 4629 Fiber Receiver at controller end of
system
Terminal Connector
ST
Singlemode
Fiber Type
9/125 µm, low loss single glass fiber
Maximum Distance
69 km (43 miles)
Minimum Bandwidth
20 MHz (Video - 1310 nm /Control - 1550 nm)
Requirement
Single mode fiber receiver at controller end of
system
Terminal Connector
ST
