22
en | Installing the Pipe Mount
AutoDome Pipe Mount
F.01U.251.410 | 1.0 | 2011.08
Installation Guide
Bosch Security Systems, Inc.
3.
Attach pipe (not supplied) to the Top-mounting Flange.
4.
Route the power, video, control, and alarm wires through
the Top-Mounting Flange and down the pipe.
5.
Wrap at least five layers of Teflon tape around the threads.
6.
Apply the supplied thread sealant to the threads on the
Pipe.
–
Make sure all surfaces are clean and dry.
–
Apply a bead of sealant completely around the leading
threads of the male fitting.
–
Force the adhesive into the threads to thoroughly fill
all voids.
7.
Thread the Pipe Cap onto the down pipe and tighten
securely to prevent leaks.
WARNING!
You must thread the pipe onto the Top-mounting Flange until it
is tight. Failure to do so can result in damage, serious injury or
death.
WARNING!
You must thread the Dome Cap onto the pipe until it is tight.
Failure to do so can result in damage or serious injury or death.
