GENERAL SETUP
POWER-UP ACT.
TURBO SPEED
PRESET SPEED
SAVE
BACK
1.
Select the option "Power-Up Act." The power-up action sets the function (preset, tour,
pattern, and scan) that the system should perform when the power is cycled or after an
alarm action.
2.
Select the value "On" so that the system will resume its prior activity after an alarm or a
power failure.
3.
Select the option "Turbo Speed." This defines the pan and tilt speed during manual
operation of Pan/Tilt only.
4.
Select the appropriate value: ON or OFF.
5.
Select the option "Preset Speed." This sets the speed when moving to a predefined
preset.
6.
Select the appropriate value:
–
Fast
–
Normal
–
Slow
7.
Save the settings.
Motion Setup
This menu controls camera settings such as proportional pan/tilt, auto flip, and over tilt. To
set these functions:
1.
From the MAIN MENU, select DOME MOTION. The submenu DOME MOTION appears.
2.
Select MOTION SETUP. The screen MOTION SETUP appears.
MOTION SETUP
PROP PAN/TILT
AUTO FLIP
OVER TILT
SAVE
10.6.2
AUTODOME 4000 Mini PTZ Dome
On-Screen Display (OSD) Menu | en
59
Bosch Security Systems, Inc.
Operation Manual
2015.08 | |
Summary of Contents for VEZ-400 Series
Page 1: ...AUTODOME 4000 Mini PTZ Dome VEZ 400 Series en Operation Manual ...
Page 2: ......
Page 76: ......
Page 77: ......
