Bosch VEZ-400 Series, Operation Manual

Page: 50 / 78

From this menu, you can set up the on-screen display, create/edit/ delete a privacy mask,
change displayed image settings, set motion/face detection, and change the display language.
OSD Setup
OSD Setup allows you to program how labels are displayed on the monitor and where on your
monitor you want to display each label. To set up the on-screen display:
1.
From the MAIN MENU, select DISPLAY SETUP. The submenu DISPLAY SETUP appears.
2. Select OSD SETUP. The screen OSD SETUP appears.
OSD SETUP
LABEL POSITION
TIME
ZOOM
ID
MODE
ANGLE
SAVE
BACK
- CHANGE
- TO SETUP
1. Select the option "Label Position" to set/change the position of labels.
2. Select the value "On" to display the label position.
3. Press the button {Tele} to edit the position of labels.
4. Use the joystick to move the label up, down, left, and/or right.
5. Save the option.
6. Select any of the following labels to display:
–
Title (Label Position)
– (Dwell) Time
– Zoom (ratio)
– (Camera) ID
– (Operation) Mode
– (PTZ) Angle
Note: You can display only selected video or characters in the video. Each element may be
configured.
7. Save the option.
Privacy Zone
A Privacy mask zone allows an administrator to program a four-sided, user-defined zone which
cannot be viewed by operators. A maximum of 15 positions can be displayed on the monitor.
The mask will stay in position even with changing pan and tilt angles, and will adjust in size
according to the zoom ratio [Tele/Wide]. Bosch recommends setting the size of the mask to
10.4.1
10.4.2
50 en | On-Screen Display (OSD) Menu AUTODOME 4000 Mini PTZ Dome
2015.08 | | Operation Manual Bosch Security Systems, Inc.