Bosch VEZ-400 Series Operation Manual Download Page 48

Page: 48 / 78

From the MAIN MENU, select SYSTEM SETUP. The submenu SYSTEM SETUP appears.

Select REBOOT. The screen REBOOT appears.

REBOOT

CONTINUE?

YES: NEAR

NO: FAR

Select the option "Yes."

Select the value "Near." The system reboots.

Initialize

Initialize the system to restore some or all of the camera settings to their defaults. To
initialize:
1.

From the MAIN MENU, select SYSTEM SETUP. The submenu SYSTEM SETUP appears.

Select INITIALIZE. The screen INITIALIZE appears.

INITIALIZE

ALL

CAM

PRESET

TOUR

PATTERN

SCAN

ETC

SAVE

BACK

Select the function to initialize:
–

ALL: Clear All items saved in the system.

–

CAM: Clear camera-related settings.

–

PRESET: Clear all saved presets. (To clear presets individually, refer to Preset Setup,
page 62.)

–

TOUR: Clear saved Tours.

–

PATTERN: Clear saved Patterns.

–

SCAN: Clear saved Scan items.

10.3.3

en | On-Screen Display (OSD) Menu

AUTODOME 4000 Mini PTZ Dome

2015.08 | |

Operation Manual

Bosch Security Systems, Inc.

Summary of Contents for VEZ-400 Series















































































Search results

Summary of Contents for VEZ-400 Series

Reviews:

Related manuals for VEZ-400 Series

Brands by name

Popular brands

Bosch VEZ-400 Series, Operation Manual

Search results

Summary of Contents for VEZ-400 Series

Reviews:

Related manuals for VEZ-400 Series

Brands by name

Popular brands