Bosch SE3000 Series, Hardware Installation Manual

Page: 3 / 40

Security Escort Table of contents | en 3
Robert Bosch (SEA) Pte Ltd Hardware Installation Manual 2018.03 | SE3v1.0 | DOC
Table of contents
1 About this manual 5
1.1 Agencies 5
1.2 General information 5
1.3 Safety symbols and their meanings 5
1.4 Conflicts with other documents 6
1.5 Trademarks 6
2 System overview 7
2.1 System component description 7
2.2 Compatible parts 7
2.3 System components and specifications 8
2.3.1 Central Console 8
2.3.2 SE coordinator 9
2.3.3 SE receiver 10
2.3.4 SE transmitter 10
3 Equipment estimation 11
3.1 Location accuracy 11
3.2 Initial equipment estimate 11
3.2.1 Number of indoor SE receivers 11
3.2.2 Number of outdoor SE receivers 12
3.2.3 Allowance for special coverage requirements 13
3.2.4 Number of SE coordinators and SE receivers 13
3.3 Pre-installation coverage verification 13
3.3.1 Verify each potential SE receiver location 13
3.3.2 Indoor SE receiver installation (Summary) 15
3.3.3 Outdoor SE receiver installation (Summary) 15
3.4 Post installation after survey 16
3.4.1 Testing the location accuracy of an installation 16
3.4.2 Improving the location accuracy of an installation 19
4 Installation instructions 21
4.1 Overview of installation process after survey 21
4.2 Run system wiring 21
4.2.1 General guidelines 21
4.2.2 Indoor wiring diagram with APS-PSU-60 using 18 AWG 22
4.2.3 Indoor wiring diagram with APS-PSU-60 using 24 AWG cable 24
4.2.4 SE coordinator/SE receiver wiring notes 26
4.3 Mounting the enclosures 27
4.3.1 AE_100 indoor enclosure 27
4.3.2 AE_101 outdoor enclosure 28
4.4 Mounting and setting up components 29
4.4.1 SE coordinator installation 29
4.4.2 SE receiver installation 29
5 System power-up and debug 30
5.1 Initial system configuration 30
5.2 Powering up the system for the first time 30
6
Testing and troubleshooting 33
6.1 Built-in troubleshooting aids 33
6.2 Troubleshooting reference 33
7 Appendix: SE coordinator information sheet 36